Đế Sạc Không Dây B1 Cho Xe Hơi

Giới thiệu Đế Sạc Không Dây B1 Cho Xe Hơi

Features:
【Automatic induction】: Wireless car charger keep the automatic induction and touch sensing. The two clips will automatically open and grip your phone when you put the phone close to the holder. Easy to use and safe driving. Fully automated wireless car charger with build-in advanced infrared sensor.
【Adjustable Viewing】: Air vent mount and suction mount installation, employs a telescopic arm to allow for closer device viewing You could adjust the holder enable to hold the phone in a perfect viewing angle while driving. The 360°rotating ball joint on both mounts enables flexible viewing angles while driving.
【SMART BUILT IN CHIP】: Built-in IC chip intelligently detects the current needed, Voltage protection, Temperature control, and more advanced safety protection. (It's normal for your phone to get warm when wireless charging.
【Universal Mounting】: Universally holds all phone and case combinations, can be mounted on any flat hard surface, for example: Office table, car.
【Compatible With】:
for iPhone 11/11Pro Xs Max / Xs / Xr / X / 8 / 8 Plus, etc.
for Samsung Galaxy S6 edge / S7 edge / S8 / S9 / S10 / Note 5 / Note 7, etc.
for Huawei Mate30/Mate30 Pro Mate RS / Mate20 Pro / Mate 20 RS, etc
for Xiaomi Mix 2S / Xiaomi Mix 3 / Xiaomi Mi 9, etc.
All the phones that support Qi wireless charging standard
Other phones such as for iPhone 5/6/7 need extra Qi receiver patch to get it work. With cases (not metal) between 2-4mm on the phone, can work without any problem.


Specifications:
1.Input Voltage: DC 5V/2A 9V/1.67A
2.Input current: DC 5V/2A 9V/1.67A
3.Working frequency: 110-250KHZ
4.Operating temperature: -10 to 60 degrees
5.Charging power: 10W
6.Charging efficiency: 60% to 75%
7.Charging distance: 6.0mm
8.Standby power consumption: the average power consumption of the whole machine is less than 50mw.


Product Use:
1.When using this product, please confirm that the product is connect to the power.
2.When the USB connection is successful. The LED will light up.
3.When the mount is in standby mode, The LED will light up, and when the phone is charged or full of electricity, it will automatically stop charging.
4.LED will light up when excessive flow or foreign matters etc.errors happen, and it will not allow to charge.when trouble occurs, don’t insert the charging line into the USB. Use the 5V/2.5A -3.5A standard charger.
5.When the handset needs to be clamped, please move the mobile phone to the 50-80mm above the mount. The mount automatically opens the clip, and easily puts the mobile phone into the mount. The clip is opened automatically and handset can be taken out.
6.This product isn’t equipped with a wireless charging(QI standard) receiver, and if the handset does not have wireless receive function, please buy Andriod or apple wireless receive to use together.


Package include:
- 1 x Wireless Fast Charger Mount Holder With Package
- 1 x Micro USB cable
- 1 x Air Vent Holder
- 1 x Telescopic Arm Bracket
- 1 x User manual

Hình ảnh sản phẩm

Giá FLEX