Giới thiệu Đèn Đuôi Xe Đạp Không Dây Ipx4 Điều Khiển Từ Xa
Description: Practical bike tail light with turn signal, which has 29pcs 85LM LED lights, bright enough to be seen from 150ft away in foggy or rainy day, even in dark night. Wireless remote control design, send signals in different modes by the 5 easy to use buttons on the wireless controller, easy for controlling during riding. Using 2200mAh battery, fully charge in 3-4 hours and can work for about 7 hours. The remote control use 180mAh battery, which can keep working for more than 2 months after 1-2 hours fully charge. Both the signal light and remote control can be charged from any USB Port, convenient for using. IPX4 Waterproof level, which can be used in small to moderate rain in the temperature of in -4-140°F, perfect for mountain bike, road bicycles, etc. Installation step: Take out the turn signal and the fixed support, slide the fixed support in grooves and snap the buckle. Then put the loaded turn signal on the bicycle seat tube and tighten it with screws. If it is too loose, you’d better to add a rubber gasket. The remote control is suitable for the handle size between 18-28mm. Specification: Dimensions: 111.6x30x33.8mm Waterproof Grade: IPX4 Power Supply: DC 5V 1A Red Warning Light Luminance: 85 lumen Battery Capacity: 2200mAh(bike tail light)/180mAh(remote control) Endurance Time: Work for about 7 hours under constant brightness Charging Time: The charging time is about 2-3 hours Package Includes: 1 Piece Turn Signal 1 Piece Remote Control 1 Piece Turn Signal Fixed Support 2 Pieces Rubber Gasket 1 Piece Micro USB Charging Cable 1 Piece Fixed Screw and Nut for Turn Signal 1 Piece Screw and Nut for Remote Control 1 Piece User Manual Note: Please charge the lights in time before the batteries run out,or it will damage the batteries.