Dụng Cụ Đánh Trứng Bằng Thép Không Gỉ

Giới thiệu Dụng Cụ Đánh Trứng Bằng Thép Không Gỉ

Name: 6-Wire Whip Whisk Beater For KitchenAid K5AWW
Model: 867910
Specifications:
Color: Silver
Material: 304 Stainless steel
Size: φ105×185mm (4.1×7.3")
Product process: Riveting assembly
Features: Even mixing, Good fit, Low noise, Easy to clean

Feature
- Can be used for blenders, milkshakes, dough mixers, etc.
- It has a good fit with devices. Fits for KitchenAid K5AWW model stand mixers.
- 6 wire whip for quickly incorporating air into ingredients for fluffy whipped cream, perfectly boiled frostings, and cakes with whipped egg whites.
- Low noise, easy to install and easy to clean.

Attach/Remove a wire whip:

To attach Wire Whip:
1) Turn speed control to OFF.
2) Unplug Stand Mixer or disconnect power.
3) Tilt motor- head back.
4) Slip beater onto beater shaft and press upward as far as possible.
5) Turn beater to right, hooking beater over the pin on the shaft.
6) Plug into a grounded 3 prong outlet.

To Remove Wire Whip:
1) Turn speed control to OFF.
2) Unplug Stand Mixer or disconnect power.
3) Tilt motor- head back.
4) Press beater upward as far as possible and turn left.
5) Pull beater from beater shaft.

Adjust the BEATER TO BOWL CLEARANCE:
If the Wire Whip hits the bottom of the bowl or is too far away from the bowl, you can correct the clearance easily
1) Turn speed control to OFF.
2) Unplug Stand Mixer or disconnect power.
3) Tilt motor- head back.
4) Turn beater height adjustment screw SLIGHTLY counterclockwise (left) to raise the Wire Whip or clockwise (right) to lower the Wire Whip.
5) Make adjustment so that the Wire Whip just clears the surface of the bowl. If you over adjust the screw, you may not be able to lock the motor- head when it is lowered.

Package included:
1 x Wire Whip

Notice:
1. Please allow 1-5mm error due to manual measurement. Please make sure you do not mind before you bid.
2. The colors may have different as the difference display, please understand.

Hình ảnh sản phẩm

Giá MOUTAI