Hộp Đựng Xà Phòng Cảm Biến Tự Động Bằng Thép Không Gỉ

Giới thiệu Hộp Đựng Xà Phòng Cảm Biến Tự Động Bằng Thép Không Gỉ

Material: Stainless steel
Capacity: 280ml
Power supply: AAA battery *4 (not included)
Color: silver
Product size: 182*107*73mm (maximum)
Features: Fully automatic stainless steel induction infrared hands-free soap sterilizer. Built-in infrared smart sensor, put your hand under the sensor to automatically produce soap, fully automatic contactless operation to avoid secondary cross infection of bacteria. Very suitable for use in bathrooms, kitchens, offices, schools, hospitals, restaurants and restaurants.
Note: Large openings are easy to fill. Suitable for lotion, hand sanitizer or disinfectant.
Operating instructions:
1. After unpacking and taking out the product, open the battery compartment at the bottom of the fuselage, insert 4 AA 1.5V alkaline batteries (1.2V rechargeable batteries cannot be used) in the direction of positive and negative poles, and then cover the battery compartment cover
2. Long press the switch button on the head of the fuselage for 3-4 seconds, after observing the indicator light flashes once, release the switch button, the indicator light goes out without lighting for a long time, at this time it means that it has been turned on and enters the normal working state ( If the indicator light stays on after you release the switch button, please do not proceed to the next step and contact customer service for help.)
3. Don't add liquid at this time, put your hand under the "liquid outlet", observe whether the indicator light will be on, and accompanied by the sound of pumping, the hand will be removed after the pumping sound stops, then the indicator Turn off, then put it back under the liquid outlet, repeat 3-4 times to see if the indicator light will light up and there is a pumping sound every time
4. After several operations according to point 3 are normal, long press the switch button for 3-5 seconds until the indicator light turns red. At this time, the machine has been shut down. Align the base with the bottom of the fuselage and install it. Place it straight on a flat surface
5. Rotate the cover of the liquid filling port on the head of the fuselage and open it to add the liquid you need to put. Pay attention to the liquid filling port during the addition process. Do not add the liquid to the outside until the liquid level is observed by the naked eye. Stop adding liquid when the liquid port is 3-5 cm, put the cover back and screw tightly;
6. Repeat the steps in point 2 to turn on, and then repeat the steps in point 3 for multiple times until the liquid comes out (the first time needs to operate several more sensing actions to discharge the liquid, because the liquid is drawn to the discharge port and there is a period of empty The itinerary);
Frequently asked questions (FAQ):
Q: Why does the indicator light not respond after long pressing the power button after installing the battery?
A: The battery is installed incorrectly. Open the battery compartment. Please take out the battery and put it back to the positive

Hình ảnh sản phẩm

Giá BCX