Giới thiệu Bộ Khuếch Đại Tín Hiệu Vệ Tinh 20db 950-2150mhz Amp Cho Fta Rg6
Description:
LINE AMPLIFIER - it is installed in the middle of the line amplification signal device,line amplifier supply line are connected by a receiver of feeder, like other devices, such as four cutting, high frequency head (LNB) and so on, so it is an active device, the general line to provide 20dB signal gain. FEATURE- This signal amplifier works with every satellite system In the market. Perfect for all satellite applications. Improve your singnal. This amplifier is DC passive. For long satellite cable runs and improvement of satellite signal strength,No need for separate power supply(NOTE - Please purchase F-type connector if you want to work with RG6 cable.) FUNCTION - Compensation the attenuation of long distance transmission of cable line,Different cables have different frequency bands, and the attenuation of the line is different,the higher the frequency, the more severe the attenuation,because of the line loss, the signal to the receiver is small enough that even if the medium frequency gain is adjusted to the maximum, the minimum input level can not be reached (The receiver cannot work properly, It is necessary to use the line ). IMPORTANT NOTE - The line amplifier Must be placed on the high frequency head (LNB) one end. In addition, the installation position of line amplifier is very important,usually, we are installed it in the line near the high frequency head (LNB) - within 39inch/1m/3.3ft. This can effectively improve signal to noise ratio and compensation line loss. Specification: Material: Metal Size: 70x30mm Package Includes: 1 Piece Satellite Gain Inline Amplifier